FRP spiral chute is integrated spiral concentrator, the characteristics of the spiral chute, shaking table, centrifugal concentrator, developed in 1977, a new national initiative, mining, beneficiation equipment, especially the seaside, riversidesand beach, Creek Road placer mining more desirable. The product has a reasonable structure, simple installation, small footprint, ease of operation, mineral processing stable, clear sub-ore processing capacity, efficiency mineral processing enrichment is high, high recovery rate, reliable operation. With a light weight, moisture, rust, corrosion-resistant, adaptable to fluctuations in ore concentration, particle size, grade, no noise and so on. Uses: This equipment applies to sorting size 0.3 - 0.02 mm thin material of iron ore, ilmenite, chromite, pyrite, zircon, rutile, monazite, phosphorus B ore, tungsten ore, tin, tantalum ore, niobium ore, as well as differences in the proportion of other non-ferrous metals, precious metals and non-metallic mineral body. This equipment has a sorting process is stable, easy to control, to allow mineral concentration range, enrichment is high, high recovery, small footprint, water consumption, simple structure, without power, large capacity, easy to install, easy operation, small investment, quick, and other Advantages. Using the methods and principles of: Erect spiral chute, calibration of the vertical line, fixed with a metal frame or wood, sand pump the ore sent to the mouth of the feed screw top two in the right position, adding additional water to adjust the concentration of ore paddle ore oar natural from high Next hydrocyclone, an inertial centrifugal force generated in a rotating inclined surface velocity ORES proportion of the differences in the size, shape, and by the action of gravity and centrifugal force of the swirling flow, the mineral and sand separately, concentrate concentrate bucket inflow pipe connected to the tailings flow into the tailings bucket pipeline received a sand pool with sand pump to drain away, completed the whole process of mineral processing. |

|
1, to the mining leveling splitter
2, the cross (tripod)
3, to mine shafts
4, the helical groove
The 5 products interception slot
6 gathering bucket
7, slot pillar
|
FRP Spiral Chute technical parameters: |
Model |
5LL-1500 |
5LL-1200 |
5LL-900 |
5LL-600 |
5LL-400 |
Outside Diameter (mm) |
1500 |
1200 |
900 |
600 |
400 |
Pitch (mm) |
540.720 |
900,720,540 |
675,540,405 |
450,360,270 |
240,180 |
Pitch diameter ratio (pitch / diameter) |
0.75,0.6,0.45 |
0.75,0.6,0.45 |
0.75,0.6,0.45 |
0.75,0.6,0.45 |
0.6,0.45 |
Lateral inclination (degrees) |
9 |
9 |
9 |
9 |
9 |
Each up to install the screw head |
4-2 |
4-2 |
4-2 |
3 |
2 |
Feeding size (mm) |
0.3-0.02 |
0.3-0.03 |
0.3-0.03 |
0.2-0.02 |
0.2-0.02 |
Ore concentration (%) |
25-55 |
25-55 |
25-55 |
25-55 |
25-55 |
Production capacity (t / h) |
8-6 |
4-6 |
2-3 |
0.8-1.2 |
0.15-0.2 |
Dimensions |
Length (mm) |
1560 |
1360 |
1060 |
700 |
460 |
Width (mm) |
1560 |
1360 |
1060 |
700 |
460 |
Height (mm) |
5230 |
5230 |
4000 |
2600 |
1500 |
Weight (kg) |
800 |
600 |
400 |
150 |
50 | | |